Page 1 of 1

What "preset" to use on a 2007 MB Pro Nvidia 8600M GT 128MB?

Posted: 29 Jun 2016, 22:18
by skyfly555
Hello,

My MBPro broke yesterday, it was the "black screen of death" of the GPU, I suppose you know that. I have ressurrected it using the old heat gun method.

I'd like to know if there is a "preset" or suggestion on how to configure Macs Fan Control to avoid this happening again.

All the time full throttle? Whi temperature should be the maximum GPU should have to be secure?

I've attached the reality I have after 10 minutes with MBP on just surfing the text, this forum, without flash, etc.

What I have now is temperature GPU Diode dependant, from 45 ÂșC (min speed) to 60ÂșC (max speed)
Thank you very much,



Captura de pantalla 2016-06-30 a las 0.06.26.png
Captura de pantalla 2016-06-30 a las 0.06.26.png (78.83 KiB) Viewed 4225 times


Macs Fan Control 1.4.3
MacBookPro3,1
CPU: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz [100]
GPU: GeForce 8600M GT   
Mac OS X 10.11.5

Fans:
Left side-min{2000}curr{5692}max{6000}mode{2,TG0D,45,60}
Right side-min{2000}curr{5671}max{6000}mode{2,TG0D,45,60}


TempSensors:
TB0T () - -1, 128
TC0D (CPU Diode) - 53.5, 53.5
TC0P (CPU Proximity) - 48.75, 48.75
TG0D (GPU Diode) - 59, 59
TG0H (GPU Heatsink) - 47.625, 47.625
TG0V () - 50.6641, 50.6641
TGTV () - -1, 127
TTF0 () - 70, 70
TW0P (Airport Card) - 38.5, 38.5
Th0H () - 47.5, 47.5
Th1H (Heatsink Proximity) - 39.75, 39.75
Th2H () - 39.75, 39.75
Tm0P () - 43.9375, 43.9375
Ts0P (Palm Rest) - 36, 36


Disk drives:
Samsung SSD 850 EVO 250GB - 37
TOSHIBA MK5065GSX - 36